The tension for Perfect Fit Roller Blinds can be adjusted by increasing or decreasing the “wrap tension”.  Please follow the steps on page five for the Perfect Fit Roller Blinds measuring and fitting instructions found here or follow the steps below.

For the fabric to roll up, we need to add ‘wrap tension’ at the top of the blind.

1. Pull down the blind (do not manually push back up as it needs to raise naturally with the tension)

2. Carefully insert a 4mm allen key or angled allen drive attachment (R9002 as shown) into the hexagon slot in the control end, being careful not to push the screw out.

3. Turn ‘anti-clockwise’ to add tension until the blind starts to lift.

4. Tension is complete when the blind is fully opened.

5. Push the worm retaining clip into the hexagon slot to secure the tension.