Perfect Fit Roller Blinds - Peyton Antique

Glass

Compress the window seal as much as possible (if at all) then take a measurement of the visible glass area. Take three measurements for the width and drop then use the smallest measurements recorded.

Bracket Size

The bracket size is determined by the bead depth of your window. If the bracket size you require is unavailable please contact us for details.

Frame Cutout

A Frame Cutout can be selected when the window handle may foul on the Perfect Fit frame. Select the window handle position if required. Please note a Frame Cutout is only available for "bottom centre" handles for Perfect Fit Roller Blinds.

Handle Packer

Handle Packers are fitted behind the window handle base to lift the handle further away from the frame, giving additional clearance between the handle and Perfect Fit frame if required.

Light Leakage

The fabric selected is blackout and no light will pass through the fabric nor is it possible to see through the fabric. However please note this fabric will not provide total blackout, light will leak in to a room between the fabric and frame.

Operating System

Spring Tensioned

Blind is raised/lowered by moving the bottom bar up/down to the position required, tilt the bottom bar to lock the blind in place.

Left or Right Sidewinder

Blind is raised/lowered with a standard chain control and fitted to the left or right hand side of the blind.

If the blind drop is less than 250cm, the control length will be calculated as follows; blind drop divide by 2, minus 5cm.

If the blind drop is greater than or equal to 250cm, the control length will be calculated as follows; blind drop minus 150cm.

Measurements will be rounded down to the nearest 10cm increment.

Chain Colour

If the blind drop is less than 250cm, the control length will be calculated as follows; blind drop divide by 2, minus 5cm.

If the blind drop is greater than or equal to 250cm, the control length will be calculated as follows; blind drop minus 150cm.

Measurements will be rounded down to the nearest 10cm increment.

Frame Type

The new generation Perfect Fit frame available from 11th February 2025.  The frame has been re-designed to create a smoother aesthetic, giving the profile a more rounded, sleek and modern look.

Updates include;

• New contoured frame.
• Matt white frame to better match uPVC window frames.
• No screw corners to give a quicker and smoother set-up.
• Opaque corner covers to eliminate any halo effect.

The old generation frame is due to be discontinued in March 2025.